I don't know how honeywell of all companies is selling this, but I figure they have engineers that they turned loose on and got out of their way.
It is just super nice. Elegant looking, not expensive, very high quality illumination that can get bright, smoothly dimmable with a knob. a knob to adjust lighting is a good design.
In comparison, dyson makes a lamp that is the same kind of interesting genre, but they cost 10-20x.
[1] except to turn it off is inelegant - you have to press and hold instead of tap, because tap changes color temperature.
Since you’re a fan of Sapper, have you peeped the Halley? He did it for an LED lighting startup (back when that was a thing), very artsy for him. I got one on eBay several years ago that I use as a work lamp because of its supreme adjustability. Uses my favorite electromechanical connector of all time, the 3.5mm audio jack (I’ve used it on every one of my hardware products).
> Fun fact: “Akari” means light in Japanese, both as illumination and as lightness.
Wow! I love it when two languages have matching homonyms. I always wonder "what does it mean ?". Like, in English "second" to mean the unit of time and the place after "first" feels like two distinct usages. But it's the same in Spanish ("segundo"), which points to a deeper connection (and isn't so unsurprising given the shared roots of the languages): the unit of time is called that because it's the second subdivision of an hour.
The two usages of "light" in English are so distinct I'm quite surprised it's like this in the entirely unrelated Japanese language. Is this just a big coincidence, or does anyone know any deeper reasons here?
Wait until you look up the many ways 分 (usually bun in compounds, but used to spell the verb wakaru) is used. (There are also more complex variants of the kanji that emphasize various nuances.)
The first example is not really a coincidence: a second is defined by being the second subvision of an hour.
So that example fails to support any reason for akari matching light in English. But for the sake of argument here is another one: じゃり (giari, read as "ja-ri") in Japanese means gravel and in my dialect almost the same sound (giarin, "ja-ri-n") also mean gravel. Go figure.
That was exactly my intended point (and my comment does mention the hour subdivision). There are a lot of meaningless coincidental homonyms, but these tend to not be homonyms in other languages. E.g. I dunno "left" in English would be "izquierda" or "dejó". Or conversely, "vino" in Spanish would be "wine" or "came". The fact that "second" and "segundo" have homonyms in their respective languages is a clue that the unit of time and the ordinal word are the same is not a coincidence. And when you look into it it's for the reason that you state. The homonym pairs indicates an etymological relationship between the two concepts.
So I was wondering if the same applied here. My initial reaction is that "light" meaning "illuminated" and "light" meaning "not heavy" is that this is just one of those coincidences, since I can't see how that one word relates the two concepts. But given that Japanese also does the same, it makes me wonder if maybe there is some sort of relationship. Maybe it was a common belief historically that the sun was not very heavy or something like that. Or maybe not and it's just a rare double coincidence!
At least some of these cases occur because the two concepts are related by metaphor, and cultures behind each language independently followed the same path of metaphorical expansion.
The ones that clamp to your desk are no good. The clamp always works its way loose. I drilled a hole in the desk and ran a bolt through it, that works.
My articulating desk lamp was balanced for incandescent bulbs. The LED ones are heavier and pull it down.
These look quite nice. I'm very protective of desk real estate for persistent things, though. Has anyone got a nice bright focus lamp when working on things. Most of the time my room is well-enough illuminated for things, but yesterday I was doing some minor maintenance on my 3d printer hot-end and I had to use my iPhone with the flashlight on propped up. Is there some kind of compact folding lamp which nonetheless has the ability to hold position and still be moved over specific parts of my table? Battery-operated would be ideal, but I can plug things in at worst.
Milwaukee 500 Lumens LED Pivoting REDLITHIUM USB Flashlight.
Google that. It's pretty expensive for a flashlight but makes a PHENOMENAL work light. 3 brightness/focus modes, magnetic base, adjustable head, holds charge forever, and rechargable.
What a wonderful space you have created. I have so much mindlessness in where I have things placed. I feel inspired to be a bit more purposeful and organize some things now.
I'll note that many of the glass blocks they use are available all over, for a few dollars. I bought a few Doric glass blocks, stuck some diffused LED strips below them, and printed a stand/enclosure, all for under $15. Good gift for friends.
Remember a saying of 5 individual light sources in each room as a rule of interior design. Very wholesome read, made me smile and look at my own lamps.
One lamp featured was a "mini Tizio". I bought the full-size one many, many years ago. (E.g. uses a Halogen bulb.) This article prompted me to think... So I just Goolged it. My vintage Tizio is now selling for about $1,200. (Cannot remember what I spent, but very likely my <$150 filter kicked in when buying.) So if you like these lights, maybe consider the cost an investment. If after a few decades you may want to sell, and you might do well. Note: My Tizio is not for sale as it is a superb desk lamp.
Alas, a good-condition Tizio usually sells for around $200-$350 used, depending on the exact model. First-generation models may go a little higher, like $500-$600. I bought mine a couple of years ago for about €250.
If you browse sites like 1stdibs or Pamono, you're going to see dramatically inflated prices, but I don't see why anyone would ever buy there. Ebay, Selency, Vntg, etc. are more likely to sell at actual market prices.
Love the pics. Moved into a place in the 90's. Insurance agent told me, easiest way to liven up a cheap apt was to get good lighting. He was right, but I was too lazy to shop much. Only found one lamp that I really like.
It's an Ikea Torchère: kinda old now, just halogen, but I've always kept a spare "bulb" for it somewhere - replaced it every 10-20 years. I still like the weird pattern on the ceiling. :P
I share the author's love for nice lamps. A lamp is an object to enjoy every day, which doesn't require any time investment from us. It is just there, with one simple function: to look pleasing.
Really loved the lamps featured here. I'm jealous of the whole setup, including the Vitsoe shelving. Saving this for inspiration when I need to revamp my home setup. Thanks for sharing!
I fantasized about the possibilities of decorating a place, when said decorations do not need to be proofed against wanton destruction by young children
I love love love my vintage table lamps, they're "Peill Puztler" ice cube lamps I think. They were typically sold back in the days with mirror head bulbs: I know because I was there, as a kid, and my mom (RIP) had those in her apartment. And now I've got them at my place.
And because I hate to have only LED lighting, I stick good old (but brand new) incandescent bulbs in my "ice cube" lamps: such bulbs go by many names and can still be found (they're either for ovens [where they can sustain insane heat], for warming terrariums, for heating lava lamps, etc.).
Just having one or two incandescent bulb in the living room, in addition to LEDs, works wonder to give a cozy ambiance.
I'd say it's a bit sad to have lamps from the 70s but then stick cold LED bulbs into them (and, yes, even "warm" LEDs do feel incredibly cold): put incandescent bulbs and experience them at they were meant to be (once again: no need to replace the entire house with incandescent bulbs, just two or three here and there shall work wonder).
If your warm LEDs feel too cold, they’re not warm LEDs. Most ‘warm’ LEDs are either 3000K or 2700K, which is about the colour temperature of a standard incandescent at full brightness.
Look for 2200K LEDs – they’re actually warm and closer to a dimmed incandescent. I personally prefer 1800K, which are warmer still, but they’re much harder to find and have far fewer options in terms of brightness.
How does it fare with modern LED bulbs? I imagine the placement of the reflectors assumes an almost-point source of light like a filament would provide, but most LED bulbs now have a plane of LEDs inside a frosted shell.
I guess would it make a noticeable difference to put an LED faux filament bulb in here? Or is it just not as fussy as I'm imagining?
Had to look it up. The cable coming out of the middle section is unfortunate. I get it's supposed to be vaguely anthropomorphic so that's like a tail or something but... come on.
https://www.amazon.com/dp/B0D5LS2KQW
I don't know how honeywell of all companies is selling this, but I figure they have engineers that they turned loose on and got out of their way.
It is just super nice. Elegant looking, not expensive, very high quality illumination that can get bright, smoothly dimmable with a knob. a knob to adjust lighting is a good design.
In comparison, dyson makes a lamp that is the same kind of interesting genre, but they cost 10-20x.
[1] except to turn it off is inelegant - you have to press and hold instead of tap, because tap changes color temperature.
Not really the Honeywell. I tracked the lamp maker down at honeywellsmartlighting.com.
Honeywell International is licensing out the name, according to https://honeywellsmartlighting.com/pages/about-us
> Fun fact: “Akari” means light in Japanese, both as illumination and as lightness.
Wow! I love it when two languages have matching homonyms. I always wonder "what does it mean ?". Like, in English "second" to mean the unit of time and the place after "first" feels like two distinct usages. But it's the same in Spanish ("segundo"), which points to a deeper connection (and isn't so unsurprising given the shared roots of the languages): the unit of time is called that because it's the second subdivision of an hour.
The two usages of "light" in English are so distinct I'm quite surprised it's like this in the entirely unrelated Japanese language. Is this just a big coincidence, or does anyone know any deeper reasons here?
So that example fails to support any reason for akari matching light in English. But for the sake of argument here is another one: じゃり (giari, read as "ja-ri") in Japanese means gravel and in my dialect almost the same sound (giarin, "ja-ri-n") also mean gravel. Go figure.
So I was wondering if the same applied here. My initial reaction is that "light" meaning "illuminated" and "light" meaning "not heavy" is that this is just one of those coincidences, since I can't see how that one word relates the two concepts. But given that Japanese also does the same, it makes me wonder if maybe there is some sort of relationship. Maybe it was a common belief historically that the sun was not very heavy or something like that. Or maybe not and it's just a rare double coincidence!
My articulating desk lamp was balanced for incandescent bulbs. The LED ones are heavier and pull it down.
Google that. It's pretty expensive for a flashlight but makes a PHENOMENAL work light. 3 brightness/focus modes, magnetic base, adjustable head, holds charge forever, and rechargable.
One of my recent favourites - Le Soleil by Foscarini - https://www.foscarini.com/en/product/le-soleil-std-s-en/
It's wonderfully asymmetrical without overdoing it, with every layer suspended and swaying independently when prodded. Exceptional light distribution.
Brought me joy as Kondo would have said
https://arun.is/blog/pinned-value-goods/
If you browse sites like 1stdibs or Pamono, you're going to see dramatically inflated prices, but I don't see why anyone would ever buy there. Ebay, Selency, Vntg, etc. are more likely to sell at actual market prices.
It's an Ikea Torchère: kinda old now, just halogen, but I've always kept a spare "bulb" for it somewhere - replaced it every 10-20 years. I still like the weird pattern on the ceiling. :P
In addition to these also a huge fan of Anglepoise desk lamps, Lotte lamps and Mantis sconces.
It's a beautiful space though. He did a great job of cord management on his desk.
And because I hate to have only LED lighting, I stick good old (but brand new) incandescent bulbs in my "ice cube" lamps: such bulbs go by many names and can still be found (they're either for ovens [where they can sustain insane heat], for warming terrariums, for heating lava lamps, etc.).
Just having one or two incandescent bulb in the living room, in addition to LEDs, works wonder to give a cozy ambiance.
I'd say it's a bit sad to have lamps from the 70s but then stick cold LED bulbs into them (and, yes, even "warm" LEDs do feel incredibly cold): put incandescent bulbs and experience them at they were meant to be (once again: no need to replace the entire house with incandescent bulbs, just two or three here and there shall work wonder).
Look for 2200K LEDs – they’re actually warm and closer to a dimmed incandescent. I personally prefer 1800K, which are warmer still, but they’re much harder to find and have far fewer options in terms of brightness.
https://en.wikipedia.org/wiki/Poul_Henningsen
I found it when looking for a lamp that doesn't expose the bulb itself, which is exactly what it was designed for.
I guess would it make a noticeable difference to put an LED faux filament bulb in here? Or is it just not as fussy as I'm imagining?
https://duckduckgo.com/?q=Ikea+KRUX&ia=images&iax=images